HTC40E/500 Horizontal Slant Bed CNC Lathe 15KW 11KW motor GSK988TA Fanuc control SMTCL SYMG
Product Details
| Product Name: | HTC40E /500 Horizontal Slant Bed CNC Lathe | Max. Cutting Length: | 500mm |
|---|---|---|---|
| Max. Cutting Diameter: | 360 Mm | Max. Swing Diameter Over Slide: | 320 Mm |
| Type Of Spindle Head: | A2-6 | Spindle Bore Diameter: | ø65 |
| Spindle Speed Range: | 50-4500 R/min | Main Motor Power: | 15KW/11KW (30 Minutes/ Continuous) |
| Max. Output Torque Of Spindle: | 177Nm ( GSK988TA Control System) | Standard Type Of Turret: | Horizontal 8 Tool Stations |
| Highlight |
HTC40E Slant Bed CNC Lathe,GSK988TA Slant Bed CNC Lathe,11KW Horizontal CNC Lathe |
||
Product Description
Super cost-effective low failure rate HTC40E Horizontal Slant Bed CNC Lathe
Machine Tool Srtucture
Integral spindle unit, reduce the power loss of mechanical transmission, fast and steady start, with low temperature rise, small thermal deformation, high precision features.
Adopts the integral bed with an oblique Angle of 30°, and the force is more stable when cutting. The bed material is made of high density cast iron with high strength and good shock absorption.
Closed chip discharge chamber, to ensure that the cutting fluid will not flow, easy to collect iron chips.
Tail seat, with bed integral sliding guide rail, telescopic sleeve, manual locking, good rigidity.
Single layer pull cover, independent single layer pull cover is arranged inside the machine tool to reduce levels, reduce faults, not only waterproof and iron filings, but also can move at high speed and low noise.
Main Technical parameters
| Items | Unit | HTC40E/300 | HTC40E/500 | ||
| Maximum swing diameter over bed | mm | 500 | 500 | ||
| Maximun cutting length | mm | 300 | 500 | ||
| Maximum cutting diameter | mm | 360 | 360 | ||
| Maximum swing diameter on the slide | mm | 320 | 320 | ||
| Spindle nose | A2-6 | A2-6 | |||
| Spindle hole diameter | mm | 65 | 65 | ||
| Diameter of maximum through bar | mm | 50 | 50 | ||
| Single spindle | Spindle speed range | r/min/Nm | 50~4500/177 | 50~4500/177 | |
| Headstock | Spindle maximum output torque | ||||
| Main motor | 30 minutes / continuous | kW | 15/11 | 15/11 | |
| Standard chuck | Chuck diameter | inch | 8'' | 8'' | |
| X-axis fast moving speed | m/min | 30 | 30 | ||
| Z-axis fast moving speed | m/min | 30 | 30 | ||
| X-axis travel | mm | 200 | 200 | ||
| Z-axis travel | mm | 320 | 550 | ||
| Tailstock stroke | mm | _ | 350 | ||
| Tailstock spindle taper taper | Morse | _ | 5# | ||
| Top stroke | mm | _ | 100 | ||
| Standard tool holder form | Horizontal 8 station | Horizontal 8 station | |||
| Tool size | External knife | mm | 25×25 | 25×25 | |
| Boring bar diameter | mm | 40 | 40 | ||
| Machining Accuracy | IT6 | IT6 | |||
| Surface roughness of machined workpiece | μm | Ra1.6 | Ra1.6 | ||
| Positioning accuracy | X axis | mm | 0.008 | 0.008 | |
| Z axis | mm | 0.008 | 0.008 | ||
| Repeat position accuracy | X axis | mm | 0.004 | 0.004 | |
| Z axis | mm | 0.004 | 0.004 | ||
| Weight capacity | Disk type | kg | 200 | 200 | |
| Shaft parts | kg | _ | 500 | ||
| Machine weight | kg | 3400 | 3650 | ||
| Machine tool appearance | Length × width × height | mm | 2400×1900×1850 | 2400×1900×1850 | |
Standard Configuration
CNC system GSK988TA
Taiwan 8” solid chuck
8-position servo-turret
Hydraulic tailstock
Imported bearing
Domestic Lead screw and guide-way
Automatic Lubrication System
Automatic Coolant System
Lighting lamp
Full enclosure splash guard
Telescopic covers
Optional configuration
Fanuc control system
Taiwan 8” hollow chuck
12-position servo-turret
Imported lead screw and guide-way
Auto chip conveyer & chip chart
Automatic bar feeder
Power tool turret
Machine Advantage
I .Narrow V belt drive structure
Through the belt pulley directly drive the spindle rotation, reduce the power loss of mechanical transmission, start fast and stable.
II .Servo tool rest
Driven by servo motor, high precision and high reliability, can meet the requirements of high performance and fast tool change.
III .The integrated spindle encoder
The special spindle encoder cancels the synchronous belt transmission mechanism, effectively reduces the failure rate.
IV .Two axis feed
X axis and Z axis are driven by servo motor and connected directly with ball screw through elastic coupling.
Two-axis guide rail adopts rolling guide rail, the guide rail is four direction equal load type, high precision load greatly improves the processing accuracy and production efficiency


Application Field

Product Highlights
Super cost-effective low failure rate HTC40E Horizontal Slant Bed CNC Lathe Machine Tool Srtucture Integral spindle unit, reduce the power loss of mechanical transmission, fast and steady start, with low temperature rise, small thermal deformation, high precision features. Adopts the integral bed ...
SMTCL HTC40Q CNC Horizontal Lathe with Bar Feeder | Automotive Axle & Shaft Turning Solution | CE Certified
SMTCL HTC40Q CNC Horizontal Lathe with Bar Feeder | Automotive Axle & Shaft Turning Solution | CE Certified
SMTCL VMC850Q CNC Milling Drilling Boring Machine For Mold & Parts Production Vertical Machining Center
SMTCL VMC850Q vertical machining center offers high-precision milling, drilling, and boring for mold and parts production. Features 10000rpm spindle, 48m/min rapid traverse, 600kg table load, and ISO/CE certification. High-rigidity construction ensures stability and accuracy for automotive, robotics, and semiconductor applications.
1-to-2 Gantry Robot CNC Lathe Automatic Production Line High Efficiency Machining
FL300 1-to-2 gantry robot CNC lathe line automates feeding, flipping & unloading for two lathes. Customizable stroke/load, linear rail precision, reduces labor by 50% for shaft/sleeve mass production.
SMTCL GMC2040RV-A Siemens 828D BT50 Mold Processing Heavy Duty CNC Gantry Boring Milling Machining Center
SMTCL GMC2040RV-A with Siemens 828D & BT50 spindle. Features 4000x2000mm worktable, 18000kg load capacity, 40-6000rpm speed range, and superior positioning accuracy (0.032/0.025/0.02mm). High-rigidity gantry design for heavy-duty mold processing and oversized component machining.
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.