SMTCL VMC1000Q-Es vertical machining center Siemens 10000rpm 4th axis rotary table for mold making
Product Details
| Condition: | New | Cnc System: | Siemens/Fanuc/Mitsubishi |
|---|---|---|---|
| Worktable Dimensions: | 1200×500 Mm | Maximum Allowable Load: | 600kgs |
| Maximum Travel Of The Worktable - X-axis: | 1000mm | Maximum Travel Of The Slide - Y-axis: | 500mm |
| Maximum Spindle Travel - Z-Axis: | 540mm | Maximum Speed of Spindle: | 10000 Rpm |
| Spindle Taper: | BT40 | X/Y/Z Axis Rapid Traverse: | 48/48/48 M/min |
| Tool Magazine Capacity: | 24 ATC | Machine Weight: | 5235 Kgs |
| Highlight |
SMTCL,rotary table,mold making |
||
Product Description
SMTCL VMC1000Q-Es vertical machining center Siemens 10000rpm 4th axis rotary table for mold making
I.Main Technical Parameters and Accuracy of Standard Machine Tool
| Name | Specifications | Unit | ||
| Worktable | Worktable Dimensions | 1200×500 | mm | |
| Maximum Allowable Load | 600 | kg | ||
| T-slot dimensions | 18×5 | mm × piece | ||
|
Machining Range |
Maximum travel of the worktable - X-axis | 1000 | mm | |
| Maximum travel of the slide - Y-axis | 500 | mm | ||
| Maximum Spindle Travel - Z-Axis | 540 | mm | ||
| Distance between spindle end face to worktable | Maximum | 660 | mm | |
| Minimum | 120 | mm | ||
| Distance from Spindle Center to Guide Rail Base Surface | 640 | mm | ||
| Spindle | Taper Hole (7:24) | BT40 | ||
| Maximum Speed | 10000 | r/min | ||
| Rated Output Torque | 36 | N.m | ||
| Spindle Motor Power | 7.5 | kW | ||
| Spindle Drive Method | Synchronous Toothed Belt | |||
| Tool | Tool Shank Model | MAS 403 BT40 | ||
| Pull Stud Model | MAS 403 P40T-I | |||
| Feed | Rapid Traverse | X-axis | 48 | m/min |
| Y-axis | 48 | |||
| Z-axis | 48 | |||
| Power of the three-axis drive motor (X/Y/Z) | 2.2/2.2/3.55 | kW | ||
| Torque of the three-axis drive motor (X/Y/Z) | 12/12/22 | N.m | ||
| Feed Speed | 1-20000 | mm/min | ||
| Tool Magazine | Tool Magazine Type | Robot Arm | ||
| Tool Selection Method | Two-Way Nearest Tool Selection | |||
| Tool Magazine Capacity | 24 | Tool | ||
| Maximum Tool Length | 300 | mm | ||
| Maximum Tool Weight | 7 | kg | ||
|
Maximum Tool Head Diameter |
Full Tool | φ80 | mm | |
| Adjacent Empty Tool | Φ150 | mm | ||
| Tool Change Time (Tool-to-Tool) | 2.5 | s | ||
| Table Height from Foot Mounting Surface | 900 | mm | ||
| Machine Weight | 5235 | kg | ||
| Total Electrical Capacity | 22 | KVA | ||
| Machine Dimensions (Length × Width × Height) |
2700×2800×2950 (excluding chip conveyor) |
mm | ||
Machine tool weight is for reference only; the final weight is subject to the machine tool packing list.
II. Machine Tool Accuracy
Machine tool accuracy conforms to machine tool geometric accuracy acceptance standards GB/T18400.2-2010
Machine tool positioning accuracy and repeatability acceptance standards
GB/T18400.4-2010
| Inspection items | Factory standards | |
| Machining accuracy | IT6 | |
| Positioning accuracy | X-axis (mm) | 0.007 |
| Y-axis (mm) | 0.005 | |
| Z-axis (mm) | 0.005 | |
|
Repeatability Positioning accuracy |
X-axis (mm) | 0.005 |
| Y-axis (mm) | 0.004 | |
| Z-axis (mm) | 0.004 | |
| No. | Name | Model or specification | Quantity | Brand | Remark |
|
|
CNC system | Siemens 828D | 1 | Siemens | |
|
|
Main motor | 1PH3105-1DG02-0KA0 | 1 | Siemens | |
|
|
X-axis servo motor | 1FK2306-4AC01-0MB0 | 1 | Siemens | |
|
|
Y-axis servo motor | 1FK2306-4AC01-0MB0 | 1 | Siemens | |
|
|
Z-Axis servo motor | 1FK2208-4AC11-0MB0 | 1 | Siemens | |
|
|
A-axis servo motor | 1 | Siemens | ||
|
|
X-axis lead screw | Ball bearing, φ40×16, C3 | 1 | Imported | |
|
|
Y-axis lead screw | Ball bearing, φ40×16, C3 | 1 | Imported | |
|
|
Z-axis lead screw | Ball bearing, φ40×16, C3 | 1 | Imported | |
|
|
Lead screw bearing | 30×62×15 | 15 | Imported | |
|
|
X-axis guide rail | Roller, 35 | 2 | Imported | |
|
|
Y-axis guide rail | Roller, 45 | 2 | Imported | |
|
|
Z-axis guide rail | Roller, 45 | 2 | Imported | |
|
|
Spindle assembly | Front bearing inner diameter φ70mm | 1 | Domestic (Taiwan) | |
|
|
Synchronous Toothed Belt | 1 | Imported | ||
|
|
Tool Magazine | 24-tool position, disc-type robotic arm | 1 | Domestic (Taiwan) | |
|
|
Lubrication system | 1 | Domestic | ||
|
|
Water tank |
Rear water tank Without oil-water separator |
1 | SMTCL | |
|
|
Full machine protection | Includes tool magazine cover, upper right cover and rear protection | 1 | SMTCL | |
|
|
Pneumatic components | 1 | Imported | ||
|
|
Double spiral rear chip conveyor | 1 | Domestic | ||
|
|
Main power switch | 1 | Imported | ||
|
|
Main contactor | —— | Imported | ||
|
|
Heat exchanger | 1 | Domestic | ||
|
|
Integrated control panel | —— | Domestic | ||
|
|
Flexible packaging | Wooden base, no fumigation | 1 | SMTCL | |
| Depending on the delivery cycle, the manufacturer has the right to change the purchased parts of the same quality without affecting the machine tool performance. | |||||
| Category | No. | Name | Specifications | Quantity | Remark |
| Accessories |
|
Water tank | 1 piece | ||
|
|
Accessory Box | 1 box | |||
|
|
USB drive | 1 piece | |||
|
|
Foot Pad | VMC850H-71012L | 6 pieces | ||
|
|
Hollow Screw | VMC850N-71302 | 6 pieces | ||
|
|
Type I Hex Nuts (Fine Thread) | M30X2 | 6 pieces | ||
|
|
Program Control Lock Key | 1 piece | |||
|
|
Electrical Cabinet Door Key | 1 piece | |||
|
|
Air Gun | 1 piece | Selected according to specific machine tool | ||
| Documents |
|
Certificate of Conformity | 1 copy | Paper version | |
|
|
Packing List | 1 copy | Paper version | ||
|
|
Tool Magazine Instruction Manual | 1 copy | Paper version | ||
|
|
System Configuration Sheet | 1 copy | Paper version | ||
|
|
Lubrication System Instruction Manual | 1 copy | Paper version | ||
|
|
Mechanical Instruction Manual | 1 copy | Electronic version USB drive | ||
|
|
Electrical Instruction Manual | 1 copy | Electronic version USB drive | ||
|
|
Maintenance Parts Catalog | 1 copy | Electronic version USB drive | ||
|
|
Circuit Diagram | 1 copy | Electronic version USB drive | ||
|
|
System Instruction Manual | 1 copy | Electronic version USB drive |
Q1. Who is the manufacturer of the VMC1000Q-Es?
The VMC1000Q-Es is manufactured by GENERTEC Shenyang Machine Tool (SMTCL). It is a leading enterprise in the Chinese machine tool industry.
Q2. How do you ensure the quality and accuracy of the machines?
✅ All components strictly inspected
✅ 100+ controlled production processes
✅ 200+ inspection check‑items
✅ Sample machining test for every machine
✅ 72‑hour full‑load trial run before delivery
Q3. Can you provide customized machine or SPM (Special purpose machine)?
Yes, we provide Smart CNC solutions for our customer in order to increase efficiency.
Q4: What's your warranty terms?
We will supply a replacement for parts that prove to be defective for a period of 13 months,
starting on the machine's bill of lading date.
Q5. What is the services?
Pr-sales:Customized solutions, planning and design;One-to-one service
After sales:7 days 24 hours on line service, Remote guidance of installation, docking with customer software system
Q6: Why choose your company?
Products from the development, design, manufacture, assembly of the entire production process are
carried out between plants with a complete production chain which is your most reliable guarantee.
Q7: Can your company send the technical personnel to our company and direct our workers overseas?
We can supply this kind of service. When the machines arrive the buyer's installation site, we can timely send mechanical and electrical engineers to install according to the buyer's schedule. All these can be quoted and list in the contract. The seller will cooperate with the buyer to deal with visa and installation preparation before going abroad.
Q8: What's the Payment Terms?
T/T 30% initial payment when order, 70% balance payment before shipment. irrevocable letter ofcredit at sight
Product Highlights
SMTCL VMC1000Q-Es vertical machining center Siemens 10000rpm 4th axis rotary table for mold making I.Main Technical Parameters and Accuracy of Standard Machine Tool Name Specifications Unit Worktable Worktable Dimensions 1200×500 mm Maximum Allowable Load 600 kg T-slot dimensions 18×5 mm × piece ...
SMTCL HTC40Q CNC Horizontal Lathe with Bar Feeder | Automotive Axle & Shaft Turning Solution | CE Certified
SMTCL HTC40Q CNC Horizontal Lathe with Bar Feeder | Automotive Axle & Shaft Turning Solution | CE Certified
SMTCL VMC850Q CNC Milling Drilling Boring Machine For Mold & Parts Production Vertical Machining Center
SMTCL VMC850Q vertical machining center offers high-precision milling, drilling, and boring for mold and parts production. Features 10000rpm spindle, 48m/min rapid traverse, 600kg table load, and ISO/CE certification. High-rigidity construction ensures stability and accuracy for automotive, robotics, and semiconductor applications.
1-to-2 Gantry Robot CNC Lathe Automatic Production Line High Efficiency Machining
FL300 1-to-2 gantry robot CNC lathe line automates feeding, flipping & unloading for two lathes. Customizable stroke/load, linear rail precision, reduces labor by 50% for shaft/sleeve mass production.
SMTCL GMC2040RV-A Siemens 828D BT50 Mold Processing Heavy Duty CNC Gantry Boring Milling Machining Center
SMTCL GMC2040RV-A with Siemens 828D & BT50 spindle. Features 4000x2000mm worktable, 18000kg load capacity, 40-6000rpm speed range, and superior positioning accuracy (0.032/0.025/0.02mm). High-rigidity gantry design for heavy-duty mold processing and oversized component machining.
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
