Place of Origin:
China
Brand Name:
HD
Certification:
ISO
Model Number:
CW61125D
Video
Video
Heavy Duty Horizontal Lathe Machine CW61125D/12m High Quality
Product Presentation
This machine tool is mainly used for various turning operations. It can turn the end face, outer diameter, inner hole, and metric threads, inch threads, module threads, and pitch threads of parts. It can also be used to turn short cones with the upper tool rest alone, and to turn long cones with the upper tool rest and longitudinal feed. In addition, it has drilling functions. The machine tool has high power and high speed, and is strong in rigidity. It can use carbide tools for powerful turning to process various black and non-ferrous metals.
Main Parameter
| Product model | Unit | CW61125D/12000 |
| specification | ||
| Max. swing diameter over bed | mm | 1240 |
| Max.swing diameter over carriage | mm | 900 |
| Max. workpiece length | mm | 12000 |
| Bed guideway width | mm | 755 |
| Max. load bearing between chuck and the top of the tailstock | t | 6 |
| Spindle | ||
| Spindle nose | A2-15 | |
| Spindle bore | mm | 120 |
| Taper of spindle bore | Metric 140 | |
| Spindle speed ranges | rpm |
3.15-315 (21 kinds) 3.5-290 (12 kinds) |
| Spindle motor power | kW | 22 |
| Four-jaw single-action chuck | mm | φ1000 |
| Tailstock | ||
| Diameter of tailstock quill | mm | 160 |
| Travel of tailstock quill | mm | 300 |
| Taper of tailstock quill | Metric 80# | |
| Feeds&Threads (metric screw *inch screw) | ||
| Longitudinal feed | 0.1-12r/min(56 kinds) | |
| Cross feed | 0.05-6mm/r(56 kinds) | |
| Small tool holder | 0.025-3mm/r(56 kinds) | |
| Metric threads | mm | 1-120 (44 kinds) |
| Modular threads | mm | 0.5-60(45 kinds) |
| Inch threads | TPI | 28-3/8 (31 kinds) |
| Diametral pitch threads | DP | 1-56 (25 kinds) |
| Tool holder | ||
| Vertical distance from spindle center to tool mounting base | mm | 48 |
| Tool shank size | mm | 45X45 |
| Swing angle of tool holder | ±90° | |
| Max. lateral travel of the carriage | mm | 520 |
| Max. travel of the upper tool holder | mm | 300 |
| Feed per revolution of the upper and lower tool holder dials | mm | 0.05 |
| Rapid traverse speed of the tool holder | mm/min |
longitudinal 3740 transverse 1870 |
| Lubricate and operate oil pump | ||
| Model | CB-B10 | |
| Max. flow | L/min | 10 |
| Working pressure | MPa | 2.5 |
| Speed | r/min | 1500 |
Note:
When the workpiece is heavy or eccentric, the balance of workpiece movement, speed limitation and counterweight should be considered.
Standard Accessories
| No. | Name | Model | Quantity |
| 1 | Four-jaw single-action chuck | φ1000mm | 1 set |
| 2 | Steady rest | φ70mm-φ480mm | 2 sets |
| 3 | Follow rest | φ50mm-φ220mm | 1 set |
| 4 | Cooling unit | 1 set | |
| 5 | Specialized tools | 1 set | |
| 6 | Tailstock swivel center | Morse 6# | 1set |
Send your inquiry directly to us
